 |
單吸渦流泵
Design standard : ISO 2858-1935
Discharge from 20mm to 250mm. Pressure to 24㎏/c㎡ . Capacity to 1280 m /HR, Temperature to 350℃.
Characteristics
•Efficient close impeller, lower operating cost and initial investment.
•Wide coverage: 44 sizes covering different kind of head, Capactity and temperature combination.
•Interchangeability : Five bearing frame only, Lower spare parts inventory.
•Durable design : Last for longer period than average pump, with a minimum of 3mm for corrosion allowance.
Materials:
Both casing/internal can be cast iron, Ductile iron, Steel, stainless steel and other special alloy steel.
Construction:
•Horizontal end suction and top center line discharge.
•Back pull-out type for easy maintenance and disassembly.
•Lubrication: Oil bath. Grease optional.
•Thurst Bearing has long life design.
•Suitable for low and high temperature services.
•Stuffing Box: Gland Packing Standard, Mechancial Seal optional.
•Flange: JIS, other standards such as DIN,ANSI optional.
Please provide us the following information in your inquiry
•Usage
•Kinds of fluid
•Viscosity
•Pumping temperature
•Specific Gravity
•Total Head (Suction/Dischage pressure)
•Capacity
•Suction, Discharge Flange Size
•Type of Driver
•Electric Conditions and packing surfaces ground to less the 32 micro-inches.
Discharge from 20mm to 250mm. Pressure to 24㎏/c㎡ . Capacity to 1280 m /HR, Temperature to 350℃.
Characteristics
•Efficient close impeller, lower operating cost and initial investment.
•Wide coverage: 44 sizes covering different kind of head, Capactity and temperature combination.
•Interchangeability : Five bearing frame only, Lower spare parts inventory.
•Durable design : Last for longer period than average pump, with a minimum of 3mm for corrosion allowance.
Materials:
Both casing/internal can be cast iron, Ductile iron, Steel, stainless steel and other special alloy steel.
Construction:
•Horizontal end suction and top center line discharge.
•Back pull-out type for easy maintenance and disassembly.
•Lubrication: Oil bath. Grease optional.
•Thurst Bearing has long life design.
•Suitable for low and high temperature services.
•Stuffing Box: Gland Packing Standard, Mechancial Seal optional.
•Flange: JIS, other standards such as DIN,ANSI optional.
Please provide us the following information in your inquiry
•Usage
•Kinds of fluid
•Viscosity
•Pumping temperature
•Specific Gravity
•Total Head (Suction/Dischage pressure)
•Capacity
•Suction, Discharge Flange Size
•Type of Driver
•Electric Conditions and packing surfaces ground to less the 32 micro-inches.
 |
 |
